 |
|
Phoscrete
chemically bonds to existing concrete and slightly expands as it sets
creating a permanent repair, even when exposed to extreme physical
abuse.
|
|
BOLT
PULL-OUT TEST
|
The
Bolt Pull-Out Test is a proven test to determine the effective bond
of a repair. The test is used to see how much force is required to
pull the bolt out of the concrete. A concrete repair material is considered
successful if a stress of at least 103MPa is placed on the bolt before
the material separates from the concrete. This test was performed
on PHOSCRETE. After the test reached 501MPa the concrete block actually
broke in half, leaving the PHOSCRETE still bonded to the concrete
block!
The test was then repeated and the same results occurred.
|
|
PHOSCRETE
Actually Inhibits Rusting
|
Another
tremendous advantage of PHOSCRETE is its unique ability to protect
imbedded steel from corrosion.
|
|
PHOSCRETE
Resists Freeze-Thaw Cycling
|
Other
concrete repair materials are porous (usually with at least 10% porosity).
PHOSCRETE has less than 3% porosity so even when exposed to drastic
temperature changes and freeze-thaw cycling, the PHOSCRETE repair
will last.
|
|
PHOSCRETE
Is Stronger, Early and Ultimately
|
These
higher early strengths allow PHOSCRETE to be exposed to traffic sooner.
Typically, PHOSCRETE may be exposed to rubber tyre traffic after only
thirty minutes.
COMPRESSIVE STRENGTH AT 22oC
Time Leading Brand PHOSCRETE
1 hour 14MPa 27MPa
After 1 day 41MPa 48MPa
After 3 days 48MPa 62MPa
After 28 days 59MPa 69MPa
|
| |
|
PHOSCRETE
For Every Occasion
|
PHOSCRETE
comes in five different mixes to meet a wide variety of needs. PHOSCRETE
Castable for standard concrete repairs, PHOSCRETE Gunnable for vertical
and overhead surfaces, PHOSCRETE Extendable for applications which
require the material to be extended with sand, PHOSCRETE Hot Floor
for industrial floors which are subjected to spills and splashes up
to 1093oC and PHOSCRETE Winter for a faster set in colder temperatures.
|
|
PHOSCRETE
REALLY WORKS!
|
PHOSCRETE
Concrete is a super strong super fast setting concrete material developed
from a patented new Space-Age binder system.
Unlike any other cementitious material on the market, PHOSCRETE forms
an epoxy-type bond to concrete creating a permanent repair normally
possible only with far more expensive and exotic materials.
Before PHOSCRETE it was often necessary to completely replace or continually
patch deteriorated concrete structures. PHOSCRETE's new technology
now makes it possible to repair roads, curbs, driveways, patios, porches,
floors and other concrete surfaces. These repairs will last as long
as the original structure.
PHOSCRETE requires no water to set.
For industrial use, PHOSCRETE is supplied as a dry mix with a unique
"liquid activator".
For retail use PHOSCRETE is supplied as a slurry along with a "powder
activator".
PHOSCRETE has many advantages over ordinary concretes and concrete
repair materials:
Bonds permanently to Existing Concrete
Inhibits Rusting Of Reinforcing Steel
Resists Freeze-Thaw Cycling
High Early and Ultimate Strengths
Applicable Below Freezing Temperatures
Fast Setting
Bonds Permanently To Itself
Bonds Permanently To Metals
Looks Like Concrete
Easy To Use
|
